| Customization: | Available |
|---|---|
| Usage: | Packaging of Goods, Produce Packing Belt |
| Packaging Material: | Film |
Industry-leading Audited Factory
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Technical parameter: | |
| Model | Cracker packing line |
| Feeding style | Customized |
| Feeding lane | Depends on capacity |
| Line speed | Depends on capacity |
| Adapted packaging machine model | ZP100,ZP320,ZP480,ZP500,ZP560 etc. |
| Packing speed | 100-500 bags/min |
| The material in contact product | SUS304 stainless steel and food approval |
| Body frame | *Carbon steel with the painted surface *SUS304 stainless steel (Optional) |
| Power supply time | 220V 1Ph 50Hz |
|
The Distributing feeding system automatically distributes up to several thousand products per minute to various individual flow wrapping machines. Work with bakery production line to achieve no worker contact and interference and high efficiency. |
|||
|
Applicable Industry |
|||
|
The Distributing feeding system can accommodate a wide variety of products from your processing line, including: l Dry cake l Cupcake l Bread l Dorayaki l Waffle l Soft wafer l Chocolate coated wafer l Chocolate bar l Energy bars l Nutrition bars l Cookie Sandwich biscuit Pie |
|||
|
Feature |
|||
|
l Sanitary machine design allows for easy clean-up l Reliable Control system l Robust machine construction l Various width belt available l No product, no pack |
|||
|
Composition |
|||
|
|||
|
Maintenance and inspection |
|||
|
1. Maintenance and clean for machine every day or every shift. (1) Clean the machine each time after packaging. (2) Turn off the power before cleaning the machine to low the temperature of heating part. (3) Never spray the water or steam directly on the machine when cleaning. (4) Main components to be cleaned: *Remove the product chips store up in the conveyance line of the product by compressed air or in other way. *Brush off the film chips adhered to the sealing surface by the wire brush applied with the silicone oil. *Clear the dirt on the control panel, safety cover and operating surface by a piece of soft cloth. *Conductive ring of the mid sealing tool and end sealers: clean it once a week or two weeks. Clean the conductive ring by the back of the sandpaper with the master power off.
2. Maintenance and clean for machine every month. (1) Apply the lubricating grease on the bearing of the end sealers. (2) Apply the lubricating grease on the gear and chain (pulley) of the driving unit. (3) Check the tightness of the chain and belt of the driving unit, and tighten the loosed one. (4)Check the tightness of the fastening screw or nut of all parts, and tighten the loosed one.
3. Relevant inspection for machine once a half year. (1) Check the wear intensity of the belt of the driving unit, and replace the worn-out one. (2) Check the wear intensity of the rubber roller, and replace the one affecting the film advancing effect. (3) Properly adjust the brake unit of the film-carrying roller. (4) Check all wearing parts, and immediately replace the damaged one. (5) Check the fastness of the wiring on the electrical terminal plate, and tighten the loosed one. Check the inverter, programmable controller and circuit board, and remove the dust or dirt on them by the compressed air.
4. Maintenance and clean for machine every day or every shift. (1) Clean the machine each time after packaging. (2) Turn off the power before cleaning the machine to low the temperature of heating part. (3) Never spray the water or steam directly on the machine when cleaning. (4) Main components to be cleaned: *Remove the product chips store up in the conveyance line of the product by compressed air or in other way. *Brush off the film chips adhered to the sealing surface by the wire brush applied with the silicone oil. *Clear the dirt on the control panel, safety cover and operating surface by a piece of soft cloth. *Conductive ring of the mid sealing tool and end sealers: clean it once a week or two weeks. Clean the conductive ring by the back of the sandpaper with the master power off.
5. Maintenance and clean for machine every month. (1) Apply the lubricating grease on the bearing of the end sealers. (2) Apply the lubricating grease on the gear and chain (pulley) of the driving unit. (3) Check the tightness of the chain and belt of the driving unit, and tighten the loosed one. (4)Check the tightness of the fastening screw or nut of all parts, and tighten the loosed one.
6. Relevant inspection for machine once a half year. (6) Check the wear intensity of the belt of the driving unit, and replace the worn-out one. (7) Check the wear intensity of the rubber roller, and replace the one affecting the film advancing effect. (8) Properly adjust the brake unit of the film-carrying roller. (9) Check all wearing parts, and immediately replace the damaged one. Check the fastness of the wiring on the electrical terminal plate, and tighten the loosed one. Check the inverter, programmable controller and circuit board, and remove the dust or dirt on them by the compressed air. |
|
Customized feeding style |
|
Feeding lane and line speed depends on capacity |
|
Distributes up to several thousand products per minute to various individual flow wrapping machines. |
|
Packing line can be directly integrated to a variety of packaging machine |
){kind=link}